placeholder

Sealants

Guertin manufactures and delivers a full line of weatherproofing for commercial and residential applications: premium butyl tapes, caulks, thermoplastic and urethane sealants.

 

/images/uploads/thumbnail-quickreferencguides.jpg  TAPE AND
SEALANTS
QUICK
REFERENCE
GUIDE
 

 

 

CODE DESCRIPTION TYPICAL FEATURES USES / APPLICATIONS
GS1010 Thermoplastic
  • Interior/exterior, excellent adhesion to glass, metal, wood, PVC and aluminum. Fast skinning. No residual tack.
  • Product is paintable.
  • perimeter sealing and capping
  • primary & secondary sealing
  • small joint sealing
  • insulation adhesive
GS1100 Thermoplast
Weather Sealant
  • Quick, drying, fast through cure.
  • Low viscosity for easy application.
  • Excellent vapor barrier adhesion.
  • adhesive for weathering membranes or protective wraps on buildings or window installations.
GC2023
GC1023

Butyl Rubber
Sealant Fast
Skinning

  • Mastic/sealant where fast skin time is needed.
  • General caulk for sealing out moisture and dust.
  • Excellent for buses, trailers, box cars, rolling stock, etc.
  • Product is paintable.
  • chassis frame protection
  • chassis perimeter sealing
  • wheel housing sealing
  • rivet seam line & rivet holes
GM1012 Butyl Mastic
Sealant Non
Skinning Type
  • Non drying lax joint sealant that remains permanently tacky and flexible.
  • Formulated to seal aluminum/aluminum and FRP/FRP panels that are edge riveted together to form one large skin or covering. Acts as a seal against weather, moisture and dust.
  • The long open time on this product (permanently
    tacky) allows for sealant application on one station and assembly up to 48 hours later at the next assembly station.
  • Product is paintable.
  • aluminum or FRP roof seams
  • chassis frame protection
  • side panel seams with fasteners rivet seam line & rivet holes
  • under drip & rub rails
  • under floor baggage compartment
  • upper engine compartment behind entrance door frame

GS3000 Powder Coatable
Vinyl Sealant
  • Bake between a wide range of temperatures, 160C (320F) to 210C (410F).
  • Sealant can be powder coated and cured in a oven.
  • Sealant passes with 100% adhesion to steel.
  • fill weld joints on steel.
  • Made to order
GS2001 1-Part Urethane
Adhesive Sealant
  • High strength & modulus adhesive/sealant.
  • Exhibits fast set time.
  • Excellent adhesion to glass, metal, FRP and some grades of stainless steel.
  • Non gassing chemistry.
  • Product is paintable.
  • high strength floor board adhesive
  • side panels, primed aluminum and FRP
  • finishing trim molding
  • window frame installation
  • rear & front FRP caps

 

 

Tapes

CODE DESCRIPTION TYPICAL FEATURES USES / APPLICATIONS
GT2005 Quick Tack
Installation
Tape
  • Non-skinning, permanently tacky.
  • Extreme tack.
  • sealing tub and bath surrounds
GT1085 Glazing Tape
  • Non-skinning, permanently tacky.
  • Creates a flexible weather seal between two similar or dissimilar surfaces with will be subjected normal expansion/contraction and wind loading force.
  • Low temperature application to -4°F (-20°C)
  • exterior primary spacing and glazing seal when installing glass into a window sash
  • bath and tub liners
  • noise dampener
GT1064

Temperature
Resistant
Glazing Tape

  • Non-skinning, permanently tacky.
  • Passes window specification for glazing tape.
  • Excellent pump out resistance.
  • glass installation
  • standard window installation
GT1055 Pump Resistant
Glazing Tape
  • Non-skinning, permanently tacky.
  • Passes window specification for glazing tape. Extreme pump out resistance.
  • large window installation
  • skylight window applications
GT1005A Grain Bin Base Tape
  • Non-skinning, permanently tacky.
  • High strength and modulus.
  • grain bin to steel or concrete pad